|Packaging||UniCat S 25 Is Available In 50 Kg Plastic Lined HDPE Woven Bags.|
|Moisture Content||Max 13 %|
|Brightness %||Min 85 %|
|Degree of Substitution %||0.02Min|
|Residue thru 45 micron Sieve||Max. 0.03 %|
|Viscosity of 4 % solid @50 rpm Spindle No 3||300CPS|
|pH OF 10% SOLUTION||6.50 ± 1.0|
|Ash content||Max. 2.0 %|
Physical Properties :
Application : UniCat S 25 can be used to increase the retention of fillers and finers and to improve sheet strength properties at a low cost. It can be used at a level of 2-10 kg per ton of pulp. UniCat S 25 can be used for emulsification of AKD/ASA under high agitation. Typical solids of UniCat S 25 are in between 2-6% .
Advantages UniCat S 25 provides the paper maker :-
For preparing paste, UniCat S 25 is slurried in cold water till free of lumps at 3-6% solids.The slurry is heated to 95°C and maintained at that temperature with mild agitation for 30 minutes. After cooking, the paste is diluted to 1% solids before adding to stock or may be added directly to the stock. The point of addition is commonly at the intake side of the fan pump or as close as possible to the head box of the paper machine.